Cabac Copper Crimp Lug 10mm2 Cable 6mm Stud

Product Description

Copper Outdoor Style Long Barrel Lug

Copper Long Barrel Lugs are designed for external use. There is no window present and the palms are solder sealed to stop the ingress of water. The extra long barrel allows more crimps than usual, in high stress areas, such as high voltage terminations, drop out
fuses etc. The extra long barrel also allows more length for heatshrink sealing, to ensure a totally air tight seal.

The Long Barrel Outdoor Style Lug is designed for crimping with standard hexagon dies (also used for the standard range of copper lugs).

Made from 99.9%+ cu high conductivity copper, this lug provides the best electrical properties possible.

If a longer palm with two or more stud holes is required, please see the Long Palm Long Barrel Lug (LPB Range).

Standards and Compliance

AS4325 Part 1 Australia; IEC France, DIN/VDE Germany, JIS Japan, BS United Kingdom and NEMA USA
Test reports are available on request

Technical Data

Nominal Conductor (mm2): 10
ID Size (mm): 4.7
Stud (mm): 6

Conductive Material
Copper 99.95% pure
Oxygen content 30 p.p.m Max.
Tensile strength 200 MPa
Ductile rating 40%
Final metal state fully annealed

Electroplating Material
Tin 99.9% pure
Other metals lead + antimony
Thickness 5 -10 microns

General Electrical Properties
Total conductivity 99.7% IACS
Total resistivity: 1.738 micro-ohm cm

Operating Temperature
-55 to 155 deg C due to oxygen-free copper

Dimensional Specification
Tooling is interchangeable between CABAC, Utilux and Burndy